How to Use Network Performance Monitor to Monitor Cisco Devices

0
11
How to Use Network Performance Monitor to Monitor Cisco Devices

Here we can see, “How to Use Network Performance Monitor to Monitor Cisco Devices”

Cisco is ubiquitous in the world of networks. Cisco is gaining prominence in the networking area, and many network managers favor them for their advantages. Monitoring Cisco routers, firewalls, and other access points is critical, especially in large networks where one fault can bring the entire network down for a long time. Response time is important in high-performance networks. There are several alternatives for network monitoring. However, we recommend utilizing Solarwinds Network Performance Monitor.

The Network Performance Monitor (NPM) is a tool developed by Solarwinds that enables you to monitor network devices and troubleshoot performance issues. As a result, they provide visual insights to make your Cisco Systems more human-friendly. NPM is a feature-rich industry favorite, and network administrators are familiar with Solarwinds. The Network Discovery Wizard (also known as Network Sonar Wizard) makes connecting your devices to NPM a breeze.

Network Performance MonitorĀ 

Please make sure you have installed the Solarwinds NPM tool in your network (here), or you can view monitor network performance on our site that leads you through the Solarwinds Network Performance Monitor installation procedure. One of NPM’s primary benefits is that it monitors and presents network results in real-time. NPM provides insight into your network in the form of a summary and statistics. After installing the tool, you may start monitoring Cisco devices. Let’s begin.

See Also:  Part-Time Administrators and Networks

Cisco ACI Monitoring

To monitor ACI devices on your network, first, add them to NPM. If your ACI system has numerous APIC nodes, you can monitor them all.

Enable ACI Polling on one of your APIC nodes to monitor your ACI environment’s health. As each APIC has a full view of the ACI environment, this is superfluous. You can enable ACI Polling by adding a node.

  1. Log in as an administrator to your Orion web console.
  2. Once inside, choose Settings, then Manage Nodes. To add your device, click Add a Node.
  3. Specify the node’s hostname or IP address.
  4. Once this is done, pick Most Devices: SNMP and ICMP as the Polling technique, and then enter your SNMP credentials.
  5. Check the Poll for Cisco ACI option under Additional Monitoring. Enter the Cisco ACI Controller’s credentials and click Test.
  6. After that, select from the list what you want to monitor (memory use, etc.) and click Next.
  7. Recheck the device properties to ensure they are correct.
  8. You can alter the Polling values, which affects how often the node’s status is updated.
  9. In the Alerting Thresholds section, you can also adjust when a node becomes Warning or Critical.
  10. After you finish, click OK, Add node to add your node.

ASA Firewalls Monitoring

To monitor ASA Firewalls on your network, add them as nodes and activate CLI polling. Enabling CLI Polling displays accurate device information and gives ASA-specific details. Here’s how to monitor it:

  1. Go to Settings > Manage Nodes > Add Node.
  2. Enter the device’s IP address.
  3. Select SNMP or ICMP as the polling technique and provide the SNMP credentials.
  4. Polling
  5. Enable CLI Polling for Cisco Nexus or ASA devices.
  6. Provide the credentials and then click Test to validate them.
  7. Select if you want templates. In Device Templates, devices execute commands.
  8. Then click Finish.
  9. Cisco Nexus Monitoring
  10. Monitoring Cisco Nexus devices is similar to monitoring ASA Firewalls. So, to monitor Cisco Nexus devices on your network, follow the preceding methods. The only differences are the device IP addresses and the CLI polling credentials.

Monitoring Cisco SwitchStack

Network Performance Monitor can also monitor Cisco SwitchStack. Monitoring SwitchStack allows you to see each member’s health and the power and data connections between them.

To monitor Cisco Switchstack, follow the instructions in the Monitoring Cisco ACI Devices section. No need to enable ACI Polling since you won’t be monitoring ACI devices. The rest is explained.

Cisco Device Health Monitoring

After adding devices to NPM, you may examine the results/monitor data through the Orion NPM Dashboard. On the dashboard, you can see all the devices you’ve added and their data.

The results may take a while to appear. Because NPM must first gather sufficient data to offer you the statistics, enjoy monitoring your devices!

See Also:  How to Create a Baseline for Config Comparison in Network Configuration Manager?

User Questions:

Do you know how to use Cisco’s monitoring software?

Site24x7 Infrastructure is a network, server, and application monitoring service. To collect performance data from the watched site, the tool requires an agent application to be installed.

What is the process of network monitoring?

An essential part of IT network monitoring involves the constant evaluation of all network components, including routers and switches and firewalls and virtual machines, for fault and performance.

Are you aware of Cisco’s Performance Monitor?

A more advanced version of Flexible NetFlow is Cisco’s Medianet Performance Monitor (FNF). For example, besides the usual NetFlow information like source and destination IP addresses or port numbers, it can gather metrics such as Jitter. There was a loss of packets. This is a transportation incident. Packet Dropout.

What is NetFlow, and how does it function for Cisco?

As IP network traffic moves in or out of an interface, the NetFlow protocol system from Cisco captures the data. A picture of network traffic flow and volume is created by analyzing the NetFlow data.

Is there a way to measure the performance of a computer network?

Latency, packet loss indicators, jitter, bandwidth, and throughput are popular measures used to analyze network traffic performance.