How to Analyze and Monitor CPU Load on Cisco Routers in Realtime

How to Analyze and Monitor CPU Load on Cisco Routers in Realtime

Here we can see, “How to Analyze and Monitor CPU Load on Cisco Routers in Realtime”

How Can Cisco Routers’ CPU Load Be Monitored?

The number of processes being performed by the CPU in the network cannot be manually monitored. As a result, you’ll have to rely on tools created by businesses specifically for this reason. Solarwinds is well-known in the network and system management industry for the high quality of its products, and the Engineers Toolset from Solarwinds (download here) is no exception.

The CPU Load on the Router is being monitored.

Solarwinds Router CPU Load is a tool included in the Engineers Toolset to monitor CPU consumption. IT administrators must monitor and analyse the CPU load in network devices to avoid reoccurring issues and improve overall network performance. You may use the programme to keep an eye on the load on multiple Cisco routers in real-time, as well as record peak CPU levels and their times.

The current CPU load for a Cisco router is displayed as a horizontal bar compared to the maximum CPU load. A wonderful feature is that you will be warned via different colours if the memory use exceeds a defined value. The colour of the bar will change to yellow if the value meets a defined threshold value for warning, while red denotes the critical level.

Real-Time CPU Load Analysis and Monitoring

  1. To begin, launch the Engineers Toolset Launchpad by going to the Start Menu and looking for it.
  2. After it is opened, go to Network Monitoring on the left-hand side and click the Launch button for the Router CPU Load tool. Alternatively, you can search for the tool in the supplied search field and then activate it.
  3. You will need to add your device to the tool after it has opened. To do so, go to the menu bar and select the Bar option, then the Add New CPU Load Bar option.
  4. The destination device’s IP address should be provided first, followed by the SNMP credentials. You can generate a new credential by selecting the option and filling in the required information. Then, to preserve your credentials, click OK.
  5. Make sure the Poll Time option is set to Real-time, and then enter the number of seconds the device should be polled after.
  6. Finally, click OK to complete the process of adding your device. The status of the CPU load will be displayed once the device has been installed.
See Also:  How to Use Access Rights Manager to Manage User Access?

Setting a Custom Alert for Increases in Router CPU Usage

  1. On the menu bar, click the Settings drop-down menu and then Settings.
  2. Move the slider given to set the thresholds and change it as needed. You can also change the red level threshold’s text. The yellow level denotes a warning, while the red level denotes a critical situation.
  3. Go to the Notifications tab to set up a notification. There are three alternatives available to you. You can opt to have a sound, a popup, or both whenever an alert is activated. You can also set it up to display custom text when you receive an alarm by selecting the Open Notification Window on Alarm option.
  4. Finally, you have the option of logging the CPU load to a file. The Router CPU Load logs the device’s CPU load and can save it to devices if you want it to. To do so, select Logging Enabled from the drop-down menu.
  5. After that, specify the time interval for which the CPU load should be recorded. After that, specify a location for the log file to be saved. These logs are recorded as comma-separated text files.


I hope you found this information helpful. Please fill out the form below if you have any questions or comments.

User Questions:

Is it possible to track CPU usage?

OpManager is a CPU usage monitoring software that includes CPU performance monitoring, CPU health checks, CPU resource availability checks, and CPU speed checks. OpManager is a CPU utilisation monitor console for both Linux and Windows. CPU utilisation: Tracks how much of the network device’s CPU is being used.

On the Cisco ISE GUI, how do I check CPU usage?

Use the show CPU command in EXEC mode to view CPU information. Use the show CPU use command in EXEC mode to summarise CPU utilisation by Cisco ISE component. This command’s output offers a snapshot of CPU use at the time the command is run.

See Also:  How to Use the Network Config Generator to Generate Configuration Files?

How can I keep track of my CPU utilisation in real-time?

  • The CPU and memory consumption can be monitored in a variety of ways. This can be accomplished in a variety of ways.
  • The Open Distributed System Manager is a programme that allows you to manage your distributed systems…
  • In the Configuration window, expand Network Items.
  • Choose the IP address of your real-time controller.
  • View the memory utilisation in the Auto View by selecting the CPU/Memory tab.

On a Cisco switch, how do I monitor CPU usage?

Use the show process CPU details command to find CPU utilisation owing to subprocesses and tasks running under a certain process. Use the show process CPU sorted command to sort for high activity utilisation. In a stacked system, CPU use can be tracked on a per-switch basis.

How much is CPU usage typical for a server?

What Is a Normal CPU Usage? Normal CPU utilisation is 2-4 percent when the computer is idle, 10% to 30% when playing less demanding games, up to 70% for more demanding games, and 100% for rendering work.

What is a good CPU speed?

A processor with a clock speed of 3.50 to 4.2 GHz is considered good, but single-thread performance is also significant. The quantity of work accomplished by some software in a given amount of time and as a single stream of instructions is called single-thread performance.