How do you Scan the MAC address, DNS, Network Card Manufacturer, and Manufacturer’s Address on your local and remote subnets?

0
17
How do you Scan the MAC address, DNS, Network Card Manufacturer, and Manufacturer's Address on your local and remote subnets?

Here we can see, “How do you Scan the MAC address, DNS, Network Card Manufacturer, and Manufacturer’s Address on your local and remote subnets?”

As networks become more complicated, it becomes increasingly difficult to control your network environment as more devices are introduced. This is due to network advancements since more gadgets can now connect to the internet and communicate through it, commonly known as the Internet of Things (IoT).

To acquire advanced insights on the available devices on the network, we’ll be using one of the greatest tools available for network managers, so follow along.

The MAC Address Scanner can be downloaded here.

Without a doubt, the Solarwinds Engineers Toolset (download here) is the greatest companion for network engineers. Why might you wonder? ETS is network management and monitoring software with over 60 tools that IT administrators may use to effortlessly manage and monitor their network.

You must download and install it from the link mentioned above.

Using the Solarwinds ETS MAC Address Scanner

The Engineers Toolset includes a MAC Address Scanner utility, which allows network administrators to scan their network for MAC addresses. This allows them to search the local subnet for information on every device in their network. 

See Also:  How to Use Storage Resource Monitor to Manage Your Storage Arrays?

Every IP address obtained is matched to a MAC address, DNS, and other details such as the network card manufacturer and more.

In principle, the programme not only detects the MAC addresses of devices to simplify operations such as IP address mapping, but it also displays extra information such as the device’s hostname, hardware manufacturer, and more.

Engineers Toolset has several functions, including automated network discovery, which you may take advantage of using the MAC Address Scanner tool.

Because the programme isn’t limited to local subnets, you can run scans on a remote subnet as well. You may also add extra useful data columns to the table that shows the information, which we shall explore further below.

Examining Subnets on the Local and Remote Levels

  1. To begin, you must first open the Engineer’s Toolset LaunchPad. To do so, go to Start Menu and either search for the tool or look under Recently Added if it was recently installed. In any case, click on the gadget to activate it.
  2. Go to Network Discovery on the left-hand side after launching the Engineer toolset, and then click the Launch button for MAC Address Discovery.
  3. The programme automatically detects your local subnet. Select Discover MAC Addresses if that is the subnet you want to scan.
  4. The utility will begin scanning your subnet and present all available devices in a table format, along with their MAC address, IP address, DNS, and network card manufacturer. If you want to, you can add extra columns.
  5. To do so, select the Settings option from the drop-down menu, which will open the MAC Address Discovery Settings box. On the first tab, Columns, click on the column you want to add to the table on the left side, then click the right arrow button.
  6. By selecting the Export option, you can save the presented table in a variety of formats.

Conclusion

I hope you found this information helpful. Please fill out the form below if you have any questions or comments.

User Questions:

On my network, how can I scan a MAC address?

  • Open a command prompt window.
  • For Mac, type “ipconfig”, and for Linux, type “ifconfig.”
  • Then type “arp -a” into the command prompt.
  • Input the command “ping -t” if desired.

How can I figure out who made a network interface’s MAC address?

The OUI is usually located near the beginning of the address. Take a network device with the MAC address “00-14-22-01-23-45,” for example. The first three octets of the OUI for this router’s manufacture are “00-14-22.” Here are the OUI for some other well-known brands.

See Also:  What Is an Advanced IP Scanner and How Do I Use It?

How can I find a device’s IP address on my network MAC?

You may also obtain this information by going to System Preferences > Network from the Apple menu, whether your connection is wireless or cable. Then choose “Advanced” after selecting your network connection. The IP address may be found on the “TCP/IP” page, while the MAC address can be found on the “Hardware” tab.

Are you able to scan a MAC address?

A MAC address scanner searches the network for IP addresses and the MAC addresses that correspond to them. If you know an IP address, you can manually search for MAC addresses on a network using the address resolution protocol (ARP) tool, which converts IP addresses to MAC addresses.

What is the difference between a MAC scanner and a PC scanner?

Using a document-feeding or flatbed scanner, you can scan photos or documents in Preview. You can also scan a document or image and save it to your Mac by importing it into Preview. Choose File > Import from iPhone or iPad, then Scan Documents when you’re ready to scan.

How do I use CMD to find my MAC address?

To locate the MAC address, follow these steps: Open a Command Prompt and run ipconfig /all. The Physical Address is the MAC address.